Verificador profissional portátil de EVSE - Verificador de estações de carregamento (Tipo 1 e Tipo 2)

Início - Produtos - Verificador profissional portátil de EVSE - Verificador de estações de carregamento (Tipo 1 e Tipo 2)

Ferramentas de instalação, Equipamento de ensaio

Verificador profissional portátil de EVSE - Verificador de estações de carregamento (Tipo 1 e Tipo 2)

Global Voltage: Works with 110V & 230V AC, 50/60Hz.
Dual Standard: Tests both Type 2 (native) and Type 1 stations.
Full Protocol Simulation: Verifies all CP states (A-D) and PP currents (13A-63A).
Safety Compliance: Tests 30mA RCD trip and simulates critical faults.
Field Ready: IP54 rated, compact, and lightweight (~1.2kg).

Partilhar：

Portable EVSE Tester – Charging Station Tester (Type 1 & Type 2)

The Portable EVSE Tester is a comprehensive solution for the safety and functional testing of AC Electric Vehicle charging stations. Designed for technicians and installers, this all-in-one tool simulates various vehicle states to ensure charging points (Type 1 and Type 2) are operating correctly, safely, and in accordance with international standards.

Whether you are performing routine maintenance, troubleshooting a faulty station, or conducting final installation inspections, this rugged, handheld simulator provides immediate feedback on CP (Control Pilot) and PP (Proximity Pilot) states, leakage protection, and wiring integrity.

Key Features of Portable EVSE Tester (Type 1 & Type 2)

Complete Control Pilot (CP) Analysis: The Portable EVSE tester allows technicians to cycle through Control Pilot manually to verify that the EVSE (Electric Vehicle Supply Equipment) responds correctly. By switching between states A through D, you can verify if the station correctly locks the cable and initiates the charging sequence.
Proximity Pilot (PP) Simulation: Verify that the charging station correctly detects the current-carrying capacity of the charging cable. The rotary switch allows for simulation of various cable ratings (13A to 63A) to ensure the station limits current as required.
Safety & Error Testing: Simulate a "Diode Short" or a "CP Error E" to confirm the charging station immediately shuts down power. This is a critical safety test to ensure the EVSE will protect a vehicle's onboard charger in the event of a component failure.

Why Choose Portable EVSE Tester (Type 1 & Type 2)

Unlike basic multimeters, this specialized simulator interacts with the charging station’s internal logic. It eliminates the need to bring an actual Electric Vehicle to a site to verify a new installation, saving time, reducing costs, and ensuring that every station you install is safe for public or private use.

Compatibilidade universal

Supports both Type 1 (SAE J1772) and Type 2 (IEC 62196-2) charging interfaces.

Vehicle State Simulation

Easily simulate vehicle states: A (Disconnected), B (Connected), C (Charging), and D (Charging with Ventilation).

Safety First

Includes a PE (Protective Earth) pre-test and error simulation (CP Error "E" and Diode Short) to ensure the station reacts correctly to fault conditions.

Leakage & RCD Testing

Built-in capability to test RCD/GFCI trip functionality to ensure user safety against electrical shock.

Real-time Feedback

Clear digital display provides instant readings of voltage, current, and pilot signal status.

Portable & Rugged

Compact, handheld design with a high-durability housing, perfect for field use in various weather conditions.

Parameter of Portable EVSE Tester (Type 1 & Type 2)

Caraterística	Especificação
Tensão de entrada	AC 110V / 230V (Single Phase)
Frequência	50Hz / 60Hz
Test Connector	Type 2 (Socket/Plug) & Type 1 (Adapter)
CP States Simulation	A, B, C, D
PP State Simulation	Open, 13A, 20A, 32A, 63A
Fault Simulation	CP Error 'E', Diode Short
RCD Test	30mA (standard trip test)
Temperatura de funcionamento	-10 °C to 40 °C (14 °F to 104 °F)
Proteção contra ingresso	IP54 (Dust and Splash Proof)
Weight	Approx. 1.2 kg (with cables)

Centro de ajuda

FAQ

Q: What types of charging stations can this portable EVSE tester check?

A: This EVSE Tester offers universal compatibility, supporting both major global AC charging standards: Type 1 (SAE J1772, common in North America and Japan) and Type 2 (IEC 62196-2, standard in Europe and many other regions). One tool covers most public, commercial, and residential AC charging points.

Q: What key safety functions does this portable EVSE tester verify?

A: This comprehensive EV charger tester is built for safety validation. It performs critical tests, including:

Protective Earth (PE) Continuity: Checks for a proper ground connection.

RCD/GFCI Trip Testing: Verifies that the station’s residual-current device operates correctly to prevent electric shock.

Fault Simulation: Actively simulates critical errors like a “Diode Short” or “CP Error E” to confirm the station shuts down power immediately as required by safety standards.

Q: Can EVSE Tester test the communication between the charger and a vehicle?

A: Absolutely. This is a core function. The portable EVSE tester simulates all standard Control Pilot (CP) states (A, B, C, D) to verify that the station correctly manages the connection handshake, starts/stops charging, and communicates ventilation requirements. It also simulates Proximity Pilot (PP) signals to test if the station correctly detects and respects the cable’s current rating.

Q: Is this Portable EVSE Tester suitable for field use and harsh environments?

A: Yes. Designed as a portable EVSE Tester, it features a compact, rugged, and handheld design with a durable housing. It is built to withstand the demands of daily field use by technicians in various weather and site conditions.

Q: Who is the ideal user for this Portable EVSE Tester (Type 1 & Type 2)?

A: This EVSE Tester is an essential tool for:

EV Charging Station Installers & Electricians

Facility & Fleet Maintenance Technicians

Service and Commissioning Engineers

Quality Assurance / Compliance Inspectors
Anyone responsible for the safe installation, functionality, and ongoing reliability of AC charging infrastructure will benefit from this portable EVSE tester.

Guias de que pode precisar

Qual é a diferença entre os cabos de carregamento de veículos eléctricos de tipo 1, tipo 2 e tipo 3?

À medida que os veículos eléctricos (VEs) continuam a ganhar força em todo o mundo, os acessórios de carregamento de VEs fiáveis e normalizados tornam-se essenciais. Uma área que frequentemente causa confusão - especialmente para novos proprietários de VEs ou